Bandwidth/Twilio Network Bridge Setup

This guide walks through the initial setup for Bandwidth's Network Bridge with Twilio. The network bridge allows you to use Bandwidth to create phone calls using our network from another authorized API provider.

You must contact Bandwidth Customer Support to get your SIP domain and port number.

Pre-Reqs

Steps

  1. Create New SIP Credentials
  2. Create call via Twilio with new SIP Creds

Create New Sip Credentials

In order to route the outbound calls through Bandwidth, you'll need to create a new set of SIP credentials. To generate your own hash values, you can follow the instructions below, but if you would like Bandwidth to generate those hash values for you, you can skip ahead to the Using the UI section of this guide.

Value Required Description
Username required String identifying the user.
Domain optional String refining the identity of the user. The Domain will be joined to the UserName with an @ to create a composite username. For example, the UserName bob could be combined with the domain somewhere.com to create a composite username bob@somewhere.com
Hash1 required String representing a potential Hash values used to authenticate the client. The value should be computed from an MD5 Hash of: {composite-username}:{Realm}:{Password}.
Hash2 required String representing a potential Hash value used to authenticate the client. The value should be computed from an MD5 Hash of {composite-username}:{Realm}:{Realm}:{Password}.

The Twilio platform requires a SIPAuthUsername and a SIPAuthPassword. These examples assume that your username=sipauthtest and password=password.

Generate MD5 Hash

Either using the command line or an online tool generate the md5 hash from the username and desired password.

Most *nix (mac, linux) come with MD5 hash built in. Check that MD5 is installed by opening up the terminal and typing: Check that MD5 is installed

$ which md5
/sbin/md5

Once MD5 is installed, run the command: md5 -s {composite-username}:{Realm}:{Password} where {Password} is the desired password

Default Setup (No Domain Specified as Part of the User's ID)

Generate MD5 Hash1 without Domain
composite-username : realm : password
sipauthtest : custxx.auth.bandwidth.com : password
md5 -s sipauthtest:custxx.auth.bandwidth.com:password
MD5 ("sipauthtest:custxx.auth.bandwidth.com:password") = fe438bddfc087dda89d29e637f5684ab
Generate MD5 Hash2 without Domain
composite-username : realm realm : password
sipauthtest : custxx.auth.bandwidth.com custxx.auth.bandwidth.com : password
md5 -s sipauthtest:custxx.auth.bandwidth.com:custxx.auth.bandwidth.com:password
MD5 ("sipauthtest:custxx.auth.bandwidth.com:custxx.auth.bandwidth.com:password") = 79bb0e55551e14a2f329a282c7cf145

Non-Default Setup (Domain Specified)

Generate md5 Hash1 with domain somewhere.com
composite-username : realm : password
bob@somewhere.com : custxx.auth.bandwidth.com : password
md5 -s bob@somewhere.com:custxx.auth.bandwidth.com:password
MD5 ("bob@somewhere.com:custxx.auth.bandwidth.com:password") = 817d76e91aad032a8c272229f468bfb2
Generate md5 Hash2 with domain somewhere.com
composite-username : realm realm : password
bob@somewhere.com : custxx.auth.bandwidth.com custxx.auth.bandwidth.com : password
md5 -s bob@somewhere.com:custxx.auth.bandwidth.com:custxx.auth.bandwidth.com:password
MD5 ("bob@somewhere.com:custxx.auth.bandwidth.com:custxx.auth.bandwidth.com:password") = 39679d2a73c2e1ea719621bc0d8fdac8

Add the Newly Created Hash to Sip Credentials

After generating the hash value, fill in the Hash1 and Hash2 values to create the SIP credentials.

Using the UI

Select Sip Credentials from the account overview page on the Bandwidth Dashboard

Using the API

You can also use the API to create SIP credentials after generating the MD5 hash value. When using the API, Bandwidth will not generate the hashes for you - you must supply your own hash values. You can create multiple SIP credentials within one API call.

POST https://dashboard.bandwidth.com/api/accounts/{accountId}/sipCredentials
HTTP/1.1
Content-Type: application/xml; charset=utf-8
Authorization: Basic dXNlcm5hbWU6cGFzc3dvcmQ=

<SipCredentials>
    <SipCredential>
        <UserName>sipauthtest</UserName>
        <Hash1>fe438bddfc087dda89d29e637f5684ab</Hash1>
        <Hash1b>79bb0e55551e14a2f329a282c7cf145</Hash1b>
    </SipCredential>
    <SipCredential>
        <UserName>bob</UserName>
        <Domain>somewhere.com</Domain>
        <Hash1>817d76e91aad032a8c272229f468bfb2</Hash1>
        <Hash1b>39679d2a73c2e1ea719621bc0d8fdac8</Hash1b>
    </SipCredential>
</SipCredentials>

Create Call Using the Network Bridge

To create a call using the network bridge format:

  • TO field like sip:{Desired_to_number}@custxx.auth.bandwidth.com:{Port}
  • SipAuthUsername as the username created above like sipauthtest
  • SipAuthPassword as the password used to create the MD5 hash like password
Format the TO Field to use the Network Bridge

sip:+17778889999@custxx.auth.bandwidth.com:5006

Curl Request to Create the Call
curl 'https://api.twilio.com/2010-04-01/Accounts/{AccountId}/Calls.json' -X POST \
--data-urlencode 'To=sip:+17778889999@custxx.auth.bandwidth.com:5006' \
--data-urlencode 'From=+15553334444' \
--data-urlencode 'Url=http://requestb.in/zolm8azo' \
--data-urlencode 'SipAuthUsername=sipauthtest' \
--data-urlencode 'SipAuthPassword=password' \
-u {AccountId}:{AuthToken}

results matching ""

    No results matching ""